wpc flooring on concrete

wpc flooring on concrete

wpc flooring on concrete: Detailed explanation and practical guide of common construction methods

With the diversification of modern home decoration styles, wpc flooring has gradually become a new favorite of floor decoration materials due to its green, environmentally friendly, beautiful and durable characteristics. Among the many installation methods, wpc flooring on concrete is the most common one. This article will introduce the construction method of wpc flooring on concrete in detail, as well as precautions to help you better understand this process.

1. Preparation before construction

1. Material preparation: Purchase wpc flooring that meets national standards, as well as necessary auxiliary materials, such as moisture-proof membrane, floor mats, glue, etc.

2. Tool preparation: Prepare the tools required for construction, such as cutting machines, electric drills, screwdrivers, rubber hammers, etc.

3. Ground treatment: Make sure the concrete floor is flat, dry and clean. If there are any uneven places, they need to be polished or repaired.

2. Construction steps

1. Laying moisture-proof membrane: Lay a layer of moisture-proof membrane on the concrete floor to prevent moisture penetration and prevent the wpc flooring from being damp and deformed.

2. Laying the mat: Lay a layer of mat on the moisture-proof membrane. The function of the mat is to relieve the ground pressure and increase the comfort of the wpc flooring.

3. Installing wpc flooring:

a. Laying the first row of wpc flooring: Lay the first row of wpc flooring flat on the mat, keep a certain distance from the wall (about 1/2 of the thickness of the floor), and gently tap it with a rubber hammer to make it close.

b. Installing the second row of wpc flooring: Lay the second row of wpc flooring offset from the first row, glue the joints of the floor with glue, and then fix the floor to the mat with screws.

c. Install the remaining wpc flooring in sequence: According to the above method, install the remaining wpc flooring in sequence, and pay attention to the gap between each row of flooring should be consistent.

4. Edge treatment: After installing the last row of wpc flooring, perform edge treatment on the edges to ensure that the edges of the floor are neat and beautiful.

3. Construction precautions

1. Ground treatment: Before construction, make sure that the ground is flat, dry and clean to avoid deformation of wpc flooring due to uneven or damp ground.

2. Laying order: When laying wpc flooring, the principle of “long first, short later” should be followed, that is, lay the longer floor first, then the shorter floor.

3. Seam treatment: During the installation process, a certain gap should be reserved to prevent the floor from expanding or contracting due to temperature changes.

4. Fixing method: When fixing wpc flooring, professional screws and glue should be used to ensure the stability of the floor.

5. Construction environment: During the construction process, the indoor temperature and humidity should be kept moderate to avoid affecting the construction quality and the service life of wpc flooring due to climate reasons.

4. Acceptance after construction

1. Floor flatness: Check whether the surface of wpc flooring is flat and there is no obvious bump.

2. Floor gap: Check whether the floor gap is uniform and there is no gap that is too large or too small.

3. Floor stability: tap the floor gently to check if there is any hollowing.

4. Edge treatment: check if the edge is neat and there is no warping.

In short, wpc flooring on concrete is a meticulous project that requires construction workers to strictly follow the construction process. Through the above introduction, I believe you have a more detailed understanding of this construction method. In the actual construction process, as long as you pay attention to details, you can ensure the installation quality of wpc flooring and create a comfortable and beautiful home environment for you.