floor decking outdoor D14025-3S exterior composite panels garden decking wood groove decking board
Wood plastic composite decking(WPC Decking), with its excellent water resistance, especially suitable for use in a water environment, mainly used for indoor toilet, bathroom, kitchen, outdoor, such as parks, the beach along the cliff, residential, gardens, ecological wood can also be used such as sauna, swimming pool.
floor decking outdoor D14025-3S exterior composite panels garden decking wood groove decking board
Description
DESCRIPTION
Woodedtech® WPC materials (wood plastic composite material) is made of: 30%HDPE+60%Wood Fibers+10% Additives
Surface: Smooth , Brushing , Sanding , Embossing and ect
Application: Construction materials , Outdoor facilities , Transportation facilities , Furnitures,etc.
About Woodedtech WPC Decking Boards
Wood plastic composites decking (WPC decking),Such as this profile:floor decking outdoor D14025-3S exterior composite panels garden decking wood groove decking board, is usually made up a mixture of plastic and wood properties. WPC is often marketed today as an ‘maintenance-free’ kind of material against wood in general, with no signs of defects such as splitting, cracking, color fading or rotting.
Wood plastic composite hollow decking, a mixture of quality wood and a completely safe HDPE polymer. A new type of environmentally friendly and “maintenance free” materials ,Compared to wood， WPC decking brings many advantages. You’re done so you can spend more time enjoying your outdoor living space, rather than working on it.
WPC is also often classified as an environmentally friendly material by emphasizing too much on its components of recycled materials. WPC decking is as a result of that chemical modification of wood more resistant to the action of water, UV radiation, and some biological, chemical and mechanical aspects of the environment, which gives their widespread utilization preference compared with tropical timber.
Product Details
| Model No.: | floor decking outdoor D14025-3S exterior composite panels garden decking wood groove decking board |
| MOQ: | 50sqm per profile & color |
| Size: | Width: 140mm; Thickness: 25mm; |
| Hot sale molds: | 140x25mm is the most hot sale profile |
| Length: | For 20GP container,Max length is 5.8 meters(Longest) ；Mostly length is 2.2/2.4/2.9/3.0/4.0 meters (recommended) or Customized |
| Design: | This WPC decking is solid profile.A side is grooves,B side is grooves too. |
| Color: | Redwood,Teak,Walnut,Coffee,Chocolate,Ebony.6 standard colors available or customized |
| Surface treatment: | Sanding. |
| Package: | Single package or pallet |
| Recyclable: | 100% Recyclable |
| Service life: | 20 years, Dimensional Stability |
| Maintenance | Requires no painting, no glue, low maintenance |
| Application: | Landscape works: outdoor decking,such as parks, the beach along the cliff, residential, gardens, ecological wood can also be used such as sauna, swimming pool. |
Colors and surface treatment
About color:
1,Light and photo position will show colors differ.
2,Normally products between two lots will get some differ.
3,Product will be slight fading due to natural aging and it is a commom situation
Installation guide
Click the Below PDF
WPC Decking installation guide.pdf
1. Considering the heat and water absorption ,WPC products will be slightly inflation,so the joist when placed should be reserved 3-5 mm from the building.
2. Considering the hard brittle of WPC materials,the joist need to pre-drilling before fix the expansion screw.
3. The spacing between joists should be 25-30cm.
4. The spacing between expansion screws should be 400mm to 500mm.
5. After the joist is fixed, drainage should be done to avoid factors that damage the decking, such as water swelling.
6. Fix the starter clips on one side of the joist.
7. Insert the decking into the starter clips, and install the first decking board.
8. Insert the clips in board and screw into joist (do not tighten).
9. Insert the second board into previous clips.
10. Insert next row of clips securing board (do not tighten).
11. Fully tighten clips & screws from step 8 and repeat from step 9.
12. Finish the corner edging and complete the decking installation.
